[Nagiosplug-help] monitor Emc clariion

trevor obba trevor_obba at yahoo.co.uk
Wed Dec 19 10:42:31 UTC 2007


I have an EMC CLARiiON AX150 I would like to monitor disk usage, fan, power supply, battery, temperature and uptime using Nagios’s check_snmp plug-in but when I snmpwalk my Emc it does not seem give any MIBS on disk usage, fan, power supply e.t.c Can anyone please enlighten me on this? What MIBS do I use the monitor the above?What MIBS indicate the disk usages, fan, power supply, battery, temperature and uptime? Here is my snmpwalk output



SNMPv2-MIB::sysDescr.0 = STRING: AX150 - Flare 2.20.0.150.5.022

SNMPv2-MIB::sysObjectID.0 = OID: SNMPv2-SMI::enterprises.1981.1.1

DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (398693054) 46 days,
3:28:50.54

SNMPv2-MIB::sysContact.0 = STRING:

SNMPv2-MIB::sysName.0 = STRING: gsx-emc-2

SNMPv2-MIB::sysLocation.0 = STRING:

SNMPv2-MIB::sysServices.0 = INTEGER: 72

IF-MIB::ifNumber.0 = INTEGER: 2

IF-MIB::ifIndex.1 = INTEGER: 1

IF-MIB::ifIndex.2 = INTEGER: 2

IF-MIB::ifDescr.1 = STRING: Internal loopback interface for 127.0.0 network

IF-MIB::ifDescr.2 = STRING: Broadcom NetLink (TM) Gigabit Ethernet - Packet
Scheduler Miniport

IF-MIB::ifType.1 = INTEGER: softwareLoopback(24)

IF-MIB::ifType.2 = INTEGER: ethernetCsmacd(6)

IF-MIB::ifMtu.1 = INTEGER: 32768

IF-MIB::ifMtu.2 = INTEGER: 1500

IF-MIB::ifSpeed.1 = Gauge32: 10000000

IF-MIB::ifSpeed.2 = Gauge32: 1000000000

IF-MIB::ifPhysAddress.1 = STRING:

IF-MIB::ifPhysAddress.2 = STRING: 0:60:16:b:71:eh

IF-MIB::ifAdminStatus.1 = INTEGER: up(1)

IF-MIB::ifAdminStatus.2 = INTEGER: up(1)

IF-MIB::ifOperStatus.1 = INTEGER: dormant(5)

IF-MIB::ifOperStatus.2 = INTEGER: dormant(5)

IF-MIB::ifLastChange.1 = Timeticks: (0) 0:00:00.00

IF-MIB::ifLastChange.2 = Timeticks: (3873272640) 448 days, 7:05:26.40

IF-MIB::ifInOctets.1 = Counter32: 0

IF-MIB::ifInOctets.2 = Counter32: 1713614552

IF-MIB::ifInUcastPkts.1 = Counter32: 0

IF-MIB::ifInUcastPkts.2 = Counter32: 12693640

IF-MIB::ifInNUcastPkts.1 = Counter32: 0

IF-MIB::ifInNUcastPkts.2 = Counter32: 2863274

IF-MIB::ifInDiscards.1 = Counter32: 0

IF-MIB::ifInDiscards.2 = Counter32: 0

IF-MIB::ifInErrors.1 = Counter32: 0

IF-MIB::ifInErrors.2 = Counter32: 0

IF-MIB::ifInUnknownProtos.1 = Counter32: 0

IF-MIB::ifInUnknownProtos.2 = Counter32: 0

IF-MIB::ifOutOctets.1 = Counter32: 0

IF-MIB::ifOutOctets.2 = Counter32: 1854654510

IF-MIB::ifOutUcastPkts.1 = Counter32: 0

IF-MIB::ifOutUcastPkts.2 = Counter32: 12824062

IF-MIB::ifOutNUcastPkts.1 = Counter32: 0

IF-MIB::ifOutNUcastPkts.2 = Counter32: 37809

IF-MIB::ifOutDiscards.1 = Counter32: 0

IF-MIB::ifOutDiscards.2 = Counter32: 0

IF-MIB::ifOutErrors.1 = Counter32: 0

IF-MIB::ifOutErrors.2 = Counter32: 0

IF-MIB::ifOutQLen.1 = Gauge32: 0

IF-MIB::ifOutQLen.2 = Gauge32: 0

IF-MIB::ifSpecific.1 = OID: SNMPv2-SMI::zeroDotZero

IF-MIB::ifSpecific.2 = OID: SNMPv2-SMI::zeroDotZero

IP-MIB::ipForwarding.0 = INTEGER: forwarding(1)

IP-MIB::ipDefaultTTL.0 = INTEGER: 128

IP-MIB::ipInReceives.0 = Counter32: 35511127

IP-MIB::ipInHdrErrors.0 = Counter32: 0

IP-MIB::ipInAddrErrors.0 = Counter32: 1696

IP-MIB::ipForwDatagrams.0 = Counter32: 0

IP-MIB::ipInUnknownProtos.0 = Counter32: 0

IP-MIB::ipInDiscards.0 = Counter32: 0

IP-MIB::ipInDelivers.0 = Counter32: 35509443

IP-MIB::ipOutRequests.0 = Counter32: 34129435

IP-MIB::ipOutDiscards.0 = Counter32: 0

IP-MIB::ipOutNoRoutes.0 = Counter32: 0

IP-MIB::ipReasmTimeout.0 = INTEGER: 60 seconds

IP-MIB::ipReasmReqds.0 = Counter32: 0

IP-MIB::ipReasmOKs.0 = Counter32: 0

IP-MIB::ipReasmFails.0 = Counter32: 0

IP-MIB::ipFragOKs.0 = Counter32: 0

IP-MIB::ipFragFails.0 = Counter32: 0

IP-MIB::ipFragCreates.0 = Counter32: 0





      ___________________________________________________________
Support the World Aids Awareness campaign this month with Yahoo! For Good http://uk.promotions.yahoo.com/forgood/





More information about the Nagiosplugin-help mailing list